Topic

Home-studio

  • Phase and polarity explained: what the Ø button does, and what it cannot fix

    Phase and polarity get used as if they mean the same thing. They do not. Polarity is a flip of the waveform; phase is about time, and its effect changes with frequency. This guide explains both, shows how to hear and fix each in a home studio, and sets out a short checking routine for multi-mic recordings, layered sounds and DI-plus-amp tracks. Sources checked on 25 Oct 2026.

    Workflows

  • Recording drums with few mics: one to four microphones, step by step

    You do not need a twelve-channel interface to record a drum kit that sounds like a band. This guide walks through one-, two-, three- and four-mic setups in the order you should try them, how to keep the snare in time between mics, and when a close mic is worth the channel. Manufacturer guidance and reference figures checked on 25 Oct 2026.

    Workflows

  • Recording tabla, sitar and harmonium at home: a practical guide

    Indian instruments break a lot of home-recording habits: the tabla has two drums with very different jobs, the sitar's sympathetic strings are half its sound, and the harmonium is a box of reeds with a noisy bellows. This guide covers tuning, mic placement, room choices and session etiquette for recording them at home, plus the performer's rights an accompanist holds under Indian law. Sources checked on 25 Oct 2026.

    Workflows

  • Room correction explained: what software and DSP monitors can fix, and what they cannot

    Room correction measures how your speakers sound at your listening position and applies a filter to flatten the result. It is useful, but it corrects one seat, not the room, and it cannot remove echo or fill deep cancellations. This guide explains how the systems work, how to run a measurement properly, and where correction fits after treatment and speaker placement. Manuals checked on 25 Oct 2026.

    Workflows

  • VCA, FET, opto and vari-mu: the four compressor types and when to reach for each

    Most compressor plug-ins model one of four kinds of hardware: VCA, FET, optical or vari-mu. Each turns the volume down with a different part, and that part decides how fast it reacts, how it lets go and what it adds. This guide explains the four, checked against the manuals on 25 Oct 2026, and gives a simple way to pick one for each job.

    Workflows

Subscribe to We are the music makers

One email a week: the music-tech and AI-in-music news that mattered, and what we think about it.

Sign-ups open soon.