Learn — By WATMM Desk —
Changing guitar strings: when to do it, which gauge, and how to make them stay in tune
When to change guitar strings, how gauge and material change the feel, a step-by-step restring, and the gentle stretch that stops new strings drifting. Sources checked on 31 Oct 2026.
Key facts
- D'Addario suggests once a month or two as a starting point for changing strings, sooner if tone dulls or you see pitting or rust.
- Fretted-instrument string gauge is the diameter in thousandths of an inch; heavier strings need more tension for the same pitch.
- D'Addario recommends about two wraps down the tuner post plus a third heading toward the bridge.
- Oils, salts and moisture from fingers are the largest cause of string corrosion.
Old strings are the cheapest tone problem to fix and the one most players put off longest. A set that sounds dull, won't hold tune or feels gritty under your fingers is costing you more on every recording and every practice session than the price of a new pack. This guide covers when to change them, what gauge and material actually change, and how to restring so the new set settles quickly.
When to change your strings
There is no fixed schedule. D'Addario says body chemistry, weather and tone preference all vary, and suggests "once a month or two" as a starting point, changing sooner if the tone has noticeably dulled or you see excessive pitting or rust (D'Addario). For acoustic strings it puts typical life at "anywhere from a few weeks to a few months", depending on playing time, environment and whether the strings are coated (D'Addario).
The signs to watch for, per D'Addario: the guitar sounds muted, the strings feel stiff, it struggles to stay in tune, or you see discolouration or corrosion (D'Addario).
Why they die: all metal strings oxidise, and oils, salts and moisture from your fingers are the largest cause (Wikipedia). Sweat, humidity and frequent playing all wear strings faster (D'Addario), which matters if you live somewhere monsoon-damp. Our guide to protecting instruments from humidity covers the room side of that.
Gauge: what the numbers mean
Gauge is the string's diameter in thousandths of an inch, and heavier strings need more tension for the same pitch, so they are harder to press down (Wikipedia). On electric guitars the high E is typically 8 to 12 thousandths and the low E 42 to 55; acoustics are usually strung heavier so they project without an amp (Wikipedia). That is why a set is named by its thinnest string: "10s" means a 0.010-inch high E.
D'Addario describes its acoustic gauges this way: custom light is easier to fret and bend, light is "the most popular gauge", and medium has more tension and projection for "a full chord sound" (D'Addario).
One caution: a different gauge can need the action (string height) adjusted (Wikipedia). Jump more than one step and a setup may be due.
Materials and winding
- Electric: windings are usually nickel-plated steel (Wikipedia).
- Acoustic: 80/20 bronze is "bright, crisp, and cutting"; phosphor bronze is "warm, balanced, and long-lasting" (D'Addario). Phosphor bronze resists corrosion slightly better than 80/20 (Wikipedia).
- Nylon: mellower, with about 50% less tension than steel, and it will not work with magnetic pickups (Wikipedia). Never put steel strings on a classical guitar built for nylon.
- Coated: designed to resist corrosion, hold tone longer and reduce finger noise (D'Addario).
- Roundwound vs flatwound: roundwound is cheapest and most common but squeaks more and wears frets faster; flatwound is smoother and lasts longer, but sounds less bright, is harder to bend and costs more (Wikipedia).
How to restring, step by step
This follows D'Addario's guide (D'Addario). In our experience the first restring takes longer than you expect, so don't rush it.
- Gather tools: the new set, wire cutters, a string winder, a tuner and a soft cloth. Support the neck on a rolled towel or neck rest.
- Remove the old strings: loosen each until slack, then cut near the 12th fret. On an acoustic, pull the bridge pins and keep them in order.
- Clean and inspect: wipe the fretboard and body, and look for loose frets, worn bridge pins or damage. With the strings off, this is the easiest moment to do it.
- Attach the new string: seat the ball end securely at the bridge. Leave enough slack to wind: for modern tuners, about a palm's length under the 12th fret.
- Wind it: feed through the post hole and aim for about two wraps down the post plus a third heading toward the bridge, with the string wrapping under itself.
- Tune up: bring each string to pitch in order. D'Addario's warning: "Don't overdo it or your new strings could break."
- Stretch and settle: gently pull each string away from the fretboard at the 12th fret, then retune. D'Addario's point is that "you're not stretching the metal, you're simply helping it sit right in the bridge and at the tuner." Play, retune, repeat until it holds.
- Trim the excess at the post once the strings have settled.
Recycle old strings where you can; D'Addario runs a PlayBack string-recycling programme (D'Addario).
Make a set last longer
Since finger oils and moisture drive corrosion (Wikipedia), the simplest habit is washing your hands before you play and wiping the strings down with a dry cloth after. Store the guitar in its case if your room is humid. Coated strings cost more up front but are built to last longer (D'Addario). You will sometimes see advice to boil old strings; it can remove grime but may leave them less elastic and more brittle (Wikipedia). We would not bother.
What we think
Change strings on a calendar for practice and on an event for recording. For everyday playing, a reminder every six to eight weeks (inside D'Addario's "month or two") stops you drifting into a year-old set without noticing, because dulling happens too slowly to hear day to day. For a session, restring a day or two before, not an hour before: the brand-new zing settles, and the strings have stopped stretching out of tune mid-take. If you are recording guitar at home, that one habit will do more for your DI tone than most plugins.
On gauge, go lighter than your ego wants. Sore fingers put new players off far more than thin tone does, in our view, and a lighter set can be swapped up once your calluses arrive. Put the restring itself into your practice routine once, unhurried, so you know you can do it before a string breaks on a gig.
The stretching step is the one most people skip and then blame the guitar for. Two minutes of gentle pulls and retunes saves half an hour of chasing pitch.
Sources
- How to Restring a Guitar, D'Addario (primary source). Accessed 31 Oct 2026.
- The Ultimate Guide to Acoustic Guitar Strings, D'Addario (primary source). Accessed 31 Oct 2026.
- String (music), Wikipedia. Accessed 31 Oct 2026.
Researched with AI assistance, written and checked by WATMM Desk.