News · launches — By WATMM Desk —

DJW Audio releases DW-303, a free open-source 303-style bass synth

UK developer DJW Audio has released DW-303, a free bass synthesizer and step sequencer modelled on the Roland TB-303, for macOS, Windows and Linux. The code is GPL-3.0-or-later and written in Rust, but the name and panel artwork are kept out of the licence, and the developer's own notes list which timing details are still estimates.

Key facts

  • What happened: Synthtopia reported on 13 Nov 2026 that UK-based DJW Audio has released DW-303, a free, open-source bass synthesizer and step sequencer modelled on the Roland TB-303. No licence key or activation is required.
  • What you get: a stage-by-stage circuit model of the oscillator, ladder filter, envelopes and VCA, a 16-step sequencer with 64 patterns and seven tracks, and builds for macOS 11+, Windows 10/11 and Linux x86_64. macOS gets VST3, AU, AAX, LV2, CLAP and standalone; Windows gets VST3, CLAP and standalone.
  • Why it matters: the source is GPL-3.0-or-later, but the DW-303 name, the DJW Audio logo and the panel artwork are not covered, so forks must be renamed and redrawn. The sequencer notes also flag gate length and slide timing as not yet measured against an original unit.

DJW Audio, a UK plugin developer, has released DW-303, a free bass synthesizer and step sequencer modelled on the Roland TB-303. Synthtopia reported it on 13 Nov 2026. The source is in a public GitHub repository, and installers are on the developer's site.

What is the DW-303?

The repository's README describes it in one line: "A circuit-modelled bass line synthesizer and step sequencer, built on RAVET." RAVET is the developer's own framework, and the project is written in Rust.

Synthtopia fills in the approach. It says DW-303 does not use a conventional virtual-analog architecture but models the TB-303 signal path stage by stage from the original circuit schematic, covering the oscillator, ladder filter, envelopes and VCA. The developer says the models were then fitted against measurements of hardware, including the filter resonance, accent and slide circuits. Synthtopia's feature list includes:

  • sawtooth and square waveforms, with cutoff, resonance, envelope modulation, decay and accent controls
  • a 16-step sequencer with separate pitch and time programming modes, as on the original
  • 64 patterns in four groups, each with A and B sections, and seven tracks for chaining them
  • internal, MIDI clock and DAW host sync, plus MIDI keyboard input
  • a Full quality mode that runs the complete circuit simulation and a lighter Economy mode

Which formats and systems does it run on?

The README gives a different set of formats for each system:

SystemFormatsInstaller
macOS 11+ (Apple Silicon, Intel)VST3, AU, AAX, LV2, CLAP, standalonesigned, notarised .dmg
Windows 10/11 x64VST3, CLAP, standalone.exe, "not yet code-signed"
Linux x86_64VST3, LV2, CLAP, standalone.tar.gz with install.sh

Two details are worth knowing before you install. AAX, the Pro Tools format, is listed for macOS only. And the panel needs a web view: the Microsoft Edge WebView2 Runtime on Windows, and GTK 3 with WebKitGTK 4.1 on Linux. Without them the README says the plug-ins "still load and play, with the host's generic controls", and Flatpak hosts such as Bitwig Studio's Flatpak show generic controls too.

What does the licence allow?

Synthtopia says DW-303 is free of charge with no licence key or activation. The README puts the source code under the GNU General Public License v3.0 or later, so anyone can read, build and modify it.

The brand is another matter. "The DW-303 name, DJW Audio name and logo, and the panel artwork are not covered by the code license," the README says. "Forks and redistributed builds must use a different name and artwork." It also states that TB-303 and Roland are trademarks of Roland Corporation and that DW-303 is not affiliated with or endorsed by Roland.

DJW Audio is not a hobby project giving everything away. Its site says it sells plugins in VST3, AU and AAX formats, with paid licences activated in the plugin and a 14-day free trial, and adds one line: "DW-303 is free and open source."

What we think

The interesting part is the paperwork, not the acid line. Free 303 emulations are not new, and we have not compared this one with hardware or with other emulations, so we make no claim about how close it sounds. What is unusual is how much of the working is public. The sequencer notes cite Roland's original owner's manual as their primary evidence, then keep a "VERIFY register" of what is still unproven. The 50% gate length is called "a best estimate", and the notes say exact slide timing needs "measurement against an original unit". On a 303 the feel of slides and gate lengths is most of the character, so in our view that list is the honest place to judge the project from, and the place a contributor with a real unit could help most.

Read this as a showcase for the framework. That is our inference, not something DJW Audio has said. A company that sells paid plugins has released one free instrument, built on its own framework, with full source. A circuit-modelled 303 is a demanding demo: if it holds up in Full mode across five plugin formats, a standalone app and three systems, that says something about RAVET, which DJW Audio lists among its products.

Open code with a closed name is a sensible split. The GPL lets the community fix and extend the engine, while the naming rule means a modified build cannot pass itself off as the official one. For users that is a useful guarantee: something called DW-303 should have come from DJW Audio.

Linux users get first-class treatment, Windows users should take one extra step. A Linux build with LV2 and CLAP on day one is still rare for a commercial developer. On Windows the installer is not yet code-signed, so download it only from the developer's site and expect a security prompt.

If you want a 303-style line without paying for one, this costs nothing to try. If you care about exact slide behaviour, read the VERIFY register first and keep an eye on the repository.

Sources

  1. DW-303 source repository and README, DJW Audio (GitHub) (primary source). Accessed 14 Nov 2026.
  2. DW-303 sequencer core notes, DJW Audio (GitHub) (primary source). Accessed 14 Nov 2026.
  3. DJW Audio, DJW Audio (primary source). Accessed 14 Nov 2026.
  4. DJW Audio Intros DW-303, a Free Open-Source TB-303-Style Synthesizer, Synthtopia. Accessed 14 Nov 2026.

Researched with AI assistance, written and checked by WATMM Desk.

Subscribe to We are the music makers

One email a week: the music-tech and AI-in-music news that mattered, and what we think about it.

Sign-ups open soon.